Zkteco Ua300 Factory - Reset

Re-enter the static IP address, Subnet Mask, and Gateway under settings. Connect the terminal back to your ZKTime software.

when prompted for an ID, and then typed her calculated "Super Password".

The primary catalyst for a factory reset is the ubiquitous problem of administrative lockout. The UA300, like many security devices, operates under a hierarchical credential model. If the sole administrator forgets the 8-digit management password—or if a technician leaves the organization without a handover—the device becomes a functional brick. No new users can be enrolled, no logs retrieved, and no settings modified. In this scenario, the hardware reset is not a choice but a necessity. It transforms an expensive paperweight back into a functional, albeit blank, device. This underscores a critical design principle in access control: physical access to the device ultimately trumps digital security. Anyone with a screwdriver and a jumper wire can claim ownership of the device, a sobering reality for organizations relying solely on password protection. zkteco ua300 factory reset

What "factory reset" means here

: Open ZKTime 5.0 or compatible software and connect to the device’s IP address. Re-enter the static IP address, Subnet Mask, and

For many ZKTeco models, you can generate a one-time "Super Password" based on the system time: exact time displayed on the device screen (e.g., 14:00). Use a calculator: Multiply the result by itself: On the device, press

Wait for the device to boot completely to the main screen, then release the switch. Wait approximately 30–40 seconds , then press the The primary catalyst for a factory reset is

❌

: Once inside the menu, go to System Options > Advanced Options > Clear Admin Privileges to remove the lock. Method 3: Hard Reset via Tamper Switch

If the device is locked and you cannot enter the menu, but it is already connected to your network, you can use the management software to clear the administrator. Open the ZKTime Attendance Management Software on your PC.