Pull off the plastic trim panels covering the left and right A-pillars. These are held in place by friction clips; use a plastic trim tool to avoid leaving marks. Step 4: Locating and Removing Main Dashboard Fasteners
Remove the driver-side lower footwell panels and any side end-trims near the doors. Main Dashboard Mounting Bolts
Use plastic trim tools to gently pry away the plastic fascia surrounding the heater controls and radio.
Open the glovebox and remove the inner screws lining the upper and lower edges of the compartment framework. Pull the glovebox assembly out. vw polo 6n dashboard removal updated
Take off the windshield wiper arms and remove the plastic scuttle panel shield below the windshield.
Look through the radio or glovebox cavity for any metal straps or brackets bolted to the transmission tunnel or the cross-member bar. Step 6: The Final Pull
10mm for battery and internal bolts; large socket for the steering wheel nut. Pull off the plastic trim panels covering the
Here are a few common issues you may encounter when removing the dashboard from your VW Polo 6N:
VW Polo 6N Dashboard Removal: The Ultimate Step-by-Step Guide (Updated)
Removing the dashboard from your VW Polo 6N requires patience and attention to detail. Here's a step-by-step guide to help you through the process: Main Dashboard Mounting Bolts Use plastic trim tools
If you are doing this to change the heater matrix, now is the time to clean the surrounding air ducts.
To clear a path for the main dashboard shell, you must remove the steering wheel components.
Unclip and unplug the indicator and wiper stalk assembly. Slide the assembly off the steering column.