To animate an object, select it on the panel and open the tab in the Properties Inspector. Here you can set conditions such as:
In the , expand your target and double-click Variables .
This is where you build the "dynamic screens" that operators see. vijeo designer 62 tutorial
Scripts can dramatically reduce the number of objects on a screen. The official tutorial gives an example where, instead of placing 15 separate numeric displays for 15 different addresses, you use just two displays and two switches plus a short script.
To test and debug the HMI project, follow these steps: To animate an object, select it on the
Drag an object onto a dedicated alarm screen so operators can view, acknowledge, and clear active faults. Trend Graphs
: Search for the "Vijeo Designer Basic Functions" playlist. Scripts can dramatically reduce the number of objects
Verify the IP address in both the HMI Target settings and the PLC.
To make the HMI talk to a PLC, you need to configure drivers. In the , expand IO Manager . Right-click on Driver1 and select New Node .
: Define how the HMI will communicate (e.g., Modbus TCP/IP or Unitelway) by adding a driver under the "I/O Manager" tab. 2. Managing Variables
