Mikrotik Exclusive | V2ray

: Handles the actual V2Ray/VLESS connection to your remote VPS.

Setting up a V2Ray client on MikroTik typically involves two containers to handle the proxying and the routing.

# 1. Add Routing Table /routing/table/add name=to-v2ray fib # 2. Mark Routing (e.g., from a specific IP) /ip/firewall/mangle/add chain=prerouting src-address=192.168.88.50 action=mark-routing new-routing-mark=to-v2ray # 3. Add Rule to route marked traffic to the container /ip/route/add dst-address=0.0.0.0/0 gateway=172.17.0.2 routing-table=to-v2ray Use code with caution. Important Considerations v2ray mikrotik

"inbounds": [ "port": 10808, "listen": "0.0.0.0", "protocol": "socks", "settings": "auth": "noauth", "udp": true ], "outbounds": [ "protocol": "vmess", "settings": "vnext": [ "address": "your-server-ip-or-domain", "port": 443, "users": [ "id": "your-uuid-here", "alterId": 0, "security": "auto" ] ] , "streamSettings": "network": "ws", "security": "tls", "wsSettings": "path": "/your-path" ] Use code with caution. Uploading the Configuration Save this file as config.json . Connect to your MikroTik via WinBox.

/ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.17.0.0/24 Use code with caution. 4. Create and Configure the V2Ray Container : Handles the actual V2Ray/VLESS connection to your

Upload this file to /v2ray/conf/config.json on the MikroTik filesystem.

/ip/proxy/set enabled=yes port=8080 parent-proxy=172.16.10.2 parent-proxy-port=10808 Use code with caution. Add Routing Table /routing/table/add name=to-v2ray fib # 2

/ip firewall mangle add chain=prerouting dst-address-list=proxy-list action=mark-routing new-routing-mark=proxy-route passthrough=yes

Since most MikroTik routers lack the RAM to run V2Ray containers smoothly, the industry-standard approach is to use MikroTik as the "Traffic Director" and let a separate device handle the decryption.

The you intend to use (VLESS, VMess, Trojan, ShadowVPN)