Once the router reboots:
: Ensure your router specifically reads V2 on its physical sticker. Flashing V1 software onto V2 hardware permanently destroys the unit and voids your warranty.
Navigate to or System Tool , then click on Firmware Upgrade (sometimes labeled Upgrade Software ). Click the Choose File or Browse button.
Select the firmware file you downloaded and unzipped in Phase 1 (e.g., nd300v2_vX.X_xxxx.bin ). Click the or Upgrade button. 4. Wait for the Process to Complete
Connect your computer to the router using an Ethernet cable . Do not perform updates over Wi-Fi, as signal drops can "brick" the device.
For the standard menu: Go to > System > Firmware Upgrade . Alternative menu path: Go to Maintenance > Firmware Update .
Login again and check the system information to confirm the new firmware version is active. Troubleshooting & Tips
Updating the software in your Totolink ND300V2 is a straightforward process. Here's a step-by-step guide:
Once you click the upgrade button, the router will begin flashing the new firmware.
Once the router reboots and the upgrade is complete, it is often recommended to perform a factory reset to ensure the new firmware works correctly. Go to -> Save/Reload Settings and click Reset .
You have successfully completed the process to . By following this guide, you have:
If the file format is incorrect, make sure you extracted the .bin or .web file from the ZIP download.