Verify that the target drive is larger than or equal to the source drive. Ensure the USB cable is unplugged from the computer.
Attach the included USB 3.0 data cable to the dock and plug it into an available port on your computer. For maximum speeds, use a native USB 3.0 port.
Plug the flexible side lights into the USB ports located on the back of the base. 2. Charging Connect the USB-C cable to the microscope head. A red indicator light signifies charging. unitek yst03004 manual verified
If your drive is not detected:
Plug your keyboard, mouse, or flash drive into the 4 USB-A ports on the front. Verify that the target drive is larger than
Default startup mode. Press 'OK' to start/stop recording.
Download the official display management software recommended by Unitek (DisplayLink or Silicon Motion Manager, depending on your exact hardware revision batch). Install the application and restart your Mac. For maximum speeds, use a native USB 3
is to save your neck and back. By elevating your screen to eye level, it prevents the "tech slouch" that leads to long-term strain.
Upon opening your UNITEK Y-ST03004 package, you should find:
If you want, I can: