Before diving into firmware, it is essential to understand the hardware itself. The UIS8141E is a system-on-a-chip (SoC) designed by Unisoc Technologies (formerly Spreadtrum). It is engineered for entry-level to mid-range applications, with its primary market being low-cost Android head units for vehicles.

If your screen is broken or stuck on a bootloop, you may have to remove the head unit from the dashboard and look at the physical sticker on the green motherboard to find the printed board model number. Step-by-Step Guide: How to Flash UIS8141E Verified Firmware

Once in recovery (usually Android Recovery or FSCI Recovery):

Before downloading any firmware, you must extract the hardware configuration data from your head unit. Do not rely on the "About Device" screen alone, as these numbers are frequently forged by manufacturers.

Connect the Male-to-Male USB cable from your PC to the 4-pin USB port of the head unit. While connecting, you may need to short the test point (GND to TX/RX) on the motherboard if it refuses to boot into download mode.

Complete Guide to UIS8141E Firmware: Download, Flash, and Troubleshooting

The resolution configuration in the firmware does not match your LCD panel. Reflash using a package explicitly labeled for your screen resolution.

The absolute largest repository for Android head unit software (requires translation from Russian). Look specifically for the "XY Auto UIS8141E" megathread.

Before searching for a "verified" update, you must identify your current system details. Go to and record: MCU Version: (e.g., TS7.x.x, FYT, XY) Android Version Build Number Resolution: (e.g., 1024x600) Where to Find Verified UIS8141E Firmware

You can usually change the generic Android startup animation back to your car brand's logo via the same hidden Factory Settings menu.

What is the of your head unit (or the motherboard ID )?

: Specifically branded units like Joying provide dedicated update packages for their own UIS8141E hardware.