Document the common audio signals (e.g., 1 beep for "off charge," long tone for "obstruction detected").
Appendix: quick-reference installation checklist (use on site)
Usually supplied in two or more sections with joining pins and bolts. thyssenkrupp levant stair lift installation manual full
Perform a test run without a person in the chair, then with a user, checking for smooth operation. 5. Troubleshooting & Maintenance Following the installation, regular maintenance is crucial:
View the Levant User Manual for free on Manua.ls . Document the common audio signals (e
Located at the top and bottom of the rail. Remote Controls: Two wireless units. Installation Kit: Brackets (feet), bolts, and screws. 3. Step-by-Step Installation Process Step A: Assemble the Rail
Lay the rail sections face-down on a protected flat surface parallel to the stairs. Remote Controls: Two wireless units
Inspect the rail gear rack and lightly lubricate it with a thin layer of silicone spray or white lithium grease if dry. Do not over-grease.
Use your spirit level to ensure the rail is straight and true.
Connect the red positive (+) lead to the remaining open battery terminal.