Pull the meter away immediately to protect the sensor plate circuitry. Fluctuating or Unstable Readings Cause: Missing ground connection or high ambient humidity.
This is your complete resource for operating and maintaining the Simco FMX002. It will cover:
Press again to release the screen and resume real-time measurement. 5. Maintenance and Calibration Cleaning the Sensor
Note: Proper grounding is mandatory for accurate absolute measurements. Step 3: Zero Adjustment simco fmx002 manual full
If you have been searching for the guide, you have come to the right place. Let’s dive deep.
The unit requires a 9V battery. Open the battery compartment on the back and ensure proper polarity [1].
Proper care will ensure the longevity and accuracy of your FMX002. Pull the meter away immediately to protect the
If dust accumulates in the sensor window, blow it out gently using clean, dry, oil-free compressed air or a specialized laboratory air bulb. Do not use solvent sprays directly on the sensor. Cleaning the Housing
: For accurate measurements, ensure the conductive case is grounded using the provided grounding lead.
The FMX002 uses two red LED guide lights to ensure the precise measuring distance of 25mm (1 inch) is maintained. While aiming the meter at your target surface, move the unit forward or backward until the two red LED spots converge into a single, focused spot. This visual confirmation eliminates the need for a ruler or spacer, ensuring repeatable and accurate results. It will cover: Press again to release the
: Exactly 1 inch ± 1/64 inch (25 mm ± 0.5 mm) from the targeted surface. Voltage Measuring Range : Low Range : 0 to ±1.49 kV High Range : ±1.0 kV to ±20.0 kV Ion Balance Mode Range : 0 to ±200 V System Accuracy : ±10% of the reading Response Time : Less than 1 second updates
To help customize this information for your specific workshop or facility, let me know:
Place the battery into the compartment and slide the cover closed. Grounding the Meter