Extracted contents typically include:
Match the software version with your NAND flash type identified in Step 1.
The PS3111SB is just the controller chip. The actual firmware version depends on the brand of the drive (e.g., ADATA, Patriot, etc.). ps3111sb firmware upgrade tool install
: If the tool does not detect the drive, you may need to short the service pads or jumpers on the SSD's PCB to force it into "Safe Mode," which allows the controller to be flashed even if the existing firmware is corrupted. 2. Installation & Usage Process Standard "Upgrade Tools" for the
The driver is not in "Engineering Mode" or the SATA controller is in RAID mode. : If the tool does not detect the
You are likely trying to flash a version meant for a different NAND type (e.g., trying to put TLC firmware on an MLC drive). Double-check your Flash ID.
Extract both zipped archives into the exact same folder on your local C:\ drive. Phase 4: Compiling Your Custom Firmware Tool You are likely trying to flash a version
If using a multi-step MPTool, click the or Parameter tab, load the configuration profile, and ensure the paths point to your firmware binary. Execute the Upgrade: Click the Start or Upgrade button.
If your Solid State Drive (SSD) suddenly stopped working and now identifies in your system as " SATAFIRM S11 Go to product viewer dialog for this item.
The (also known as the Phison PS3111-S11) is a common SSD controller that frequently requires a firmware upgrade if it becomes stuck in "SATAFIRM S11" mode. Upgrading or re-flashing the firmware will permanently erase all data on the drive. 🛠️ Required Tools