Extract all downloaded archives into separate subfolders inside your main Pritom Fix folder using a utility like WinRAR or 7-Zip. Step 3: Install the USB Flashing Drivers

Flashing firmware carries inherent risks. If performed incorrectly, it can permanently damage your hardware. Ensure you meet the following requirements before proceeding:

If your M10 is stuck on the logo or won't boot, you may need to manually flash the firmware. Because Pritom tablets are often based on generic boards, the specific "fix" depends on the internal hardware: Identify the Board ID

Do not rush into flashing your tablet.You must gather the right tools first.Using the wrong files can permanently damage your device.

To perform a full firmware "fix," you will typically need a Windows PC and a tool like Phoenix Card

Click the button at the bottom of the tool window to format and flash the fresh software stack. Step 4: Finalizing and Post-Flash Boot

If you need help finding the right files, tell me the on the back of your tablet. I can also help you find the correct chipset type or walk you through Recovery Mode if the tool won't connect. Share public link