Media: Converter In Cisco Packet Tracer Link

Use this to connect the media converter router to a switch.

Copper Ethernet (RJ45) is limited to 100 meters. A media converter allows you to switch to fiber, extending the connection to several kilometers.

Cisco Packet Tracer , a dedicated "Media Converter" device is not found in the standard toolbar. Instead, media conversion is achieved by using modular routers or switches

Add the following devices to your network: media converter in cisco packet tracer link

On the PC, open the Desktop -> Command Prompt. Ping: Type ping [default_gateway_ip] to test connectivity.

Method 3: Utilizing Built-in SFP Ports on Cisco 2960 Switches

Add two (Connect PC-A to Switch-A and PC-B to Switch-B using Copper Straight-Through cables). 2. Set up the Modular "Media Converter" Switch Open the Device Toolbox and select Switches . Use this to connect the media converter router to a switch

If your devices support both copper and fiber interfaces (e.g., Cisco 4321 router with GigabitEthernet ports), Simply:

Look for the icon representing a (it often looks like a small box with two distinct ports). Drag and drop the Media Converter onto the workspace. Step-by-Step Scenario: Connecting Copper to Fiber

: Flip the physical power switch back to the On position. Connect the Cables : Cisco Packet Tracer , a dedicated "Media Converter"

Drag a (Fast Ethernet Fiber) or PT-SWITCH-NM-1FGE (Gigabit Ethernet Fiber) module into another empty slot.

Fiber interfaces often operate at Gigabit speeds (1000 Mbps), while standard copper interfaces might run at Fast Ethernet (100 Mbps). Ensure that your switch ports are configured to compatible speeds, or use a multi-rate switch interface.