Navigate to your UnlockTool installation folder (usually C:\UnlockTool ).
The error "Loader not found" typically indicates that the tool failed to upload the necessary payload (iLoader/gaster) into the device's RAM during the exploit execution. This is often a checkm8/bootrom exploit delivery issue.
If the tool continues to fail, you may need to restore the device via iTunes/Finder first to ensure the base firmware is stable before attempting another bypass. If the tool continues to fail, you may
If it fails or loops, unplug the phone, hard-reboot it (Power + Volume Down), put it back into DFU mode, and try again. Step 5: Boot Ramdisk / Send Loader
Before providing guidance, it is critical to clarify: This is a common issue
Move the extracted firmware loader files directly into the corresponding Apple-A10-specific directory path. 3. Initialize Clean Driver Configurations
Ensure the device is listed under "Universal Serial Bus devices" as . If the tool continues to fail
This error occurs when the tool cannot identify or load the specific bootloader required for the n61ap board model (iPhone 7, global/GSM variants). This is a common issue, particularly with older or updated versions of the tool that lack the necessary firmware files, leading to a "High Quality" or "Top" service attempt failing.
If the auto-download fails, contact UnlockTool support via their ticket system – they will provide the loader file directly.