: Follow instructions to print an alignment page, then place it on the scanner glass to complete the setup. HP DeskJet 2130, 2300 Printers - First Time Printer Setup
Insert the into the left slot and the Black cartridge into the right slot at a slight upward angle until they snap into place.
The out-of-the-box experience is refreshingly simple. hp deskjet 2300 all in one printer setup
Close the scanner lid. Press either the Start Copy Black or Start Copy Color button on the physical control panel.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : Follow instructions to print an alignment page,
I can provide targeted troubleshooting steps based on your situation. Share public link
Plug the female end of the power cable firmly into the rear socket of the printer. Close the scanner lid
Open the front door and the cartridge access door. Wait for the carriage to move to the center.
You can also connect your printer directly to a single computer with a USB cable. To do this, connect the USB cable to both the printer and your computer, then follow the steps for or Option B (HP Easy Start) above. The software will detect the USB connection and configure the printer.
: Open the front cartridge access door and remove any internal cardboard or tape.
: Plug the power cord into the back of the printer and connect the other end directly to an electrical outlet.