Firstchip Fc1178 Fc1179 Mptools V1052 Link =link= Jun 2026

to begin the flashing process.

If MpTools detects the controller but fails to identify the raw flash memory chip, try downloading a newer version of the software package that includes updated NAND flash configuration files.

: Once the progress bar turns green and shows "OK" or "Finished," safely eject the drive and re-insert it to verify it is working. Troubleshooting Tips Not Recognized

Identify the Controller: Use a tool like ChipGenius or Flash Drive Information Extractor to confirm your drive uses the FC1178 or FC1179 controller. If the controller doesn't match, this tool will not work. firstchip fc1178 fc1179 mptools v1052 link

Try plugging the flash drive into a USB 2.0 port instead of a USB 3.0/3.1 port. If it remains completely dead, you may need to manually trigger Test Mode (TestMod) by shorting the data pins on the controller chip using a precision needle before plugging it in.

Extract the downloaded FirstChip_MpTools_V1.0.5.2 archive into a dedicated folder on your local drive. Right-click and select Run as Administrator .

Before hunting for the link, let’s understand what this tool actually does. MPTools stands for . These are low-level utilities released by controller manufacturers (FirstChip, formerly iTe Media) for factories to initialize and format raw NAND flash chips. to begin the flashing process

Download and run (v4.19 or later). Insert your dead USB drive. Look for output like:

If your flash drive is undergoing processing and you run into complications, let me know:

Once the status bar turns , the process is complete. If it turns Red (FAIL) , try changing the settings or using a different USB port. Important Settings in the MP Tool If it remains completely dead, you may need

You can download the clean, unpacked version from the following trusted mirror:

FirstChip Technology specializes in low-cost controller chips like the and the Go to product viewer dialog for this item.

Insert your broken USB drive into a direct motherboard USB port (avoid external hubs).