Ericsson’s Mini‑Link family—compact microwave radio systems used for backhaul and transport—hides a lot of engineering elegance behind a deceptively simple command‑line interface (CLI). For field engineers, integration teams and network troubleshooters, the Mini‑Link CLI is more than a control surface: it’s a precise, scriptable window into device state, configuration and fault data. This essay sketches why the CLI matters, how it’s organized, common workflows and a few practical tips that turn a sequence of commands into reliable, repeatable operations.
Ericsson CLI allows abbreviations as long as the command is unique. ericsson mini link cli commands
: (Within config mode) Used to begin OSPF area and routing configurations. Ericsson CLI allows abbreviations as long as the
Ericsson MINI-LINK microwave systems are the backbone of mobile backhaul and fixed wireless networks worldwide. While modern network management systems (NMS) provide graphical interfaces, mastering the Command Line Interface (CLI) is essential for rapid troubleshooting, automation, and precise configuration. alarms clear user-acknowledged admin>
MINI-LINK# show radio performance hop 1 # Observe RSL is below threshold (-75 dBm). Check TX power: MINI-LINK# show radio hop 1 tx-power # Increase marginally if allowed: MINI-LINK(config)# radio MINI-LINK(config-radio)# hop 1 MINI-LINK(config-hop)# tx-power +3 # Re-check after 5 min
admin> alarms clear user-acknowledged admin> alarms log export tftp://192.168.1.100/alarm_log.txt
To see which software packages are installed and which is active: