Din 509e06x02 Exclusive New! ❲5000+ Exclusive❳

Typically used for workpiece diameters requiring precise, moderate-sized undercuts.

The Deutsches Institut für Normung (DIN) is the German national standardization body. It develops and publishes standards for a wide range of products and services, contributing to quality, safety, and efficiency in industries both domestically and internationally.

According to German copyright law, Beuth Verlag GmbH holds the exclusive right to sell and distribute DIN standards. This exclusivity ensures that the official, legally binding documents are traceable and authentic. Always purchase standards directly from authorized sources to access the unaltered text with all its legally binding technical details.

Following the "x," the value 0.2 denotes the depth (t) of the cut, also measured in millimeters. This is the vertical distance from the original surface of the shaft down to the bottom of the groove. For a 0.6 mm radius, a depth of 0.2 mm is standard. This shallow depth ensures structural integrity is maintained while providing just enough clearance for a grinding wheel or threading tool to run out. It is important to note that while the "0.6 mm" refers to the radius (the curve), the "0.2 mm" refers to the depth . Some applications may refer to a simplified notation like "DIN 509-E1x0,2," where the "1" refers to a larger radius of 1 mm; however, "E06X02" specifically indicates the smaller, more fine-detail undercut of 0.6mm radius. din 509e06x02 exclusive

(also known as a relief groove) used in mechanical engineering. It is a standardized feature machined into a shaft or bore to ensure that mating parts can sit flush against a shoulder or to provide clearance for grinding tools. Technical Breakdown

Where a bearing, gear, or flange must sit perfectly flush against a shaft shoulder, ensuring the corner of the mated part does not interfere with the radius of the shaft corner.

), the E0.6x0.2 profile acts as an for smaller components. It provides just enough clearance for tool escape without dramatically sacrificing the structural cross-section or causing severe fatigue weakness under rotational load. 4. Technical Drawing and CAD Implementation According to German copyright law, Beuth Verlag GmbH

: Components or products manufactured to this standard would likely undergo precise engineering processes, ensuring tight tolerances and high-quality finishes.

The DIN 509E06X02 Exclusive standard represents a pinnacle of quality and performance in its specific domain. While the details of the standard are highly specialized, the implications of adhering to such a set of specifications are clear: it signifies a commitment to excellence, safety, and customer satisfaction. For those involved in industries where such standards are relevant, understanding and adhering to these exclusive specifications can offer significant advantages.

Machinists have a designated, standardized zone for tool exit, reducing tool chipping at the corners. Minimized Stress Concentration: The uniform Following the "x," the value 0

When working with exotic alloys, titanium, or hardened steels, the shallow depth of

Understanding technical standards like is essential for precision engineering, particularly when designing shafts and bores that require grinding or specific assembly tolerances. The designation DIN 509 E0.6x0.2 refers to a specific type of relief groove (undercut)