| Problem | Likely Cause | Solution | |---------|--------------|----------| | "Library not found" when loading a show | The show file references an FX type not installed (e.g., a beta plug-in) | Re-save the show on the original console, omitting that FX. | | Patching succeeds but the sound changes | Different firmware versions have different DSP models | Compare the original and new effect parameters manually. | | User library won't save | Internal storage is full or corrupted | Go to Setup > Maintenance > Format User Data (back up first!). | | Wing-Co pilot shows “Library patched” but not all parameters | The co-pilot app is outdated | Update Behringer Wing Co-Pilot app to match console firmware. |
: Allows you to take signals from any channel or direct input and patch them elsewhere pre-fader and pre-gain.
Captures entire console states for quick recall. behringer wing library patched
One of the WING's most powerful "patched" features is the library:
, have significantly "patched" (updated) the console’s capabilities: Bus-to-Bus Sends: | Problem | Likely Cause | Solution |
By following these steps and tips, you'll be well on your way to creating and managing your own patched scenes using the Behringer WING library. Happy mixing!
Before saving anything to the library, clean up your routing matrix: Press the button on the console hardware. Navigate to the Sources tab on the left side of the screen. | | Wing-Co pilot shows “Library patched” but
The WING library is divided into distinct categories for granular control over what parameters are saved and recalled:
Houses custom settings for the WING’s internal effects rack. 2. The Role of Firmware Patches