No. Resetting the waste ink counter only affects the internal counter values. Your printer drivers and saved settings remain unchanged.

After turning the printer back on, check that the error message has cleared and that the printer accepts print jobs again.

Turn the printer back on. The "Service Required" error should now be gone.

While there are some older "free" versions, they are sometimes buggy. The WIC Reset Key approach is often safer and guarantees results.

Are you struggling with the "hot" issue on your Epson SX125 printer? Look no further! The Epson SX125 adjustment program is here to help you resolve this common problem.

Forces an initialization cycle to clear severe air bubbles or blockages from the lines.

If the counter is at or near 100%, check the box again and click . A pop-up will ask for confirmation; click OK . Finalize

: Always connect via USB cable . Do not attempt this over Wi-Fi. Step-by-Step Guide to Resetting the Waste Ink Counter Preparation Turn on your Epson SX125

The Epson Stylus SX125 Go to product viewer dialog for this item.

The Adjustment Program is a proprietary service tool (not an official driver) that resets the printer’s . Inside every Epson inkjet printer is a spongy pad that absorbs ink purged during cleaning cycles. The printer tracks how much ink has been dumped there. When the counter hits a pre-set limit (around 15,000-20,000 pages or many cleaning cycles), the printer hard-locks itself to prevent an overflow leak.

The program allows users to perform technical adjustments and maintenance tasks that are typically reserved for authorized service centers: Waste Ink Pad Counter Reset

Here’s what you need to know about using the to fix this.