Note: Absolute values and exact thresholds are aircraft-specific and must be referenced from the official AMM for the specific model under test.
Connect the compensated wire to Terminal 13, and the remaining identical wires to Terminals 14 and 15.
Prepare a standard DIN cutout according to your specific 9240si form factor (e.g., 1/16 DIN, 1/8 DIN, or 1/4 DIN). 9240si loop controller user manual
Before installing the 9240SI loop controller, ensure that you have received the correct equipment and that it has not been damaged during transportation. Follow these steps for installation:
The 9240SI is a precision instrument that requires periodic calibration to maintain its accuracy. It is a legal requirement to have its calibration verified against the official Chinese civil aviation standard (JJG (Civil Aviation) 0101-2009). It is recommended to send it to a certified calibration laboratory annually, or more frequently if the tool is used daily. Before installing the 9240SI loop controller, ensure that
Clean the front membrane panel using a damp cloth and mild detergent. Do not use alcohol-based solvents.
Accessed by holding the SET key for 3 seconds. Contains basic scaling, sensor type matching, and alarm limits. It is recommended to send it to a
: Avoid touching conductive parts directly to prevent static discharge or contamination that could lead to measurement errors.